PERFORM has the ability to enter three standard deviations into the analysis. This would be done if standard deviation calculations were done in another analysis. The three standard deviations that may be entered are:

- Measurement Error Standard Deviation,
- Potential Standard Deviation, and
- Process Stream Standard Deviation.

The potential variation includes measurement error. If desired, measurement error variance may be subtracted from this estimate to assess the true product variation as follows:

(product = potential – measurement ).

This may be a concern if large measurement error variance exists. This value would be obtained from a Measurement Systems or Gauge Study. A would be calculated from these studies and is the Measurement Error standard deviation to be entered into PERFORM.

The potential variation is assessed in PERFORM using the median moving range or the median standard deviation. This may also be generated from one or more short-term "Process Potential Studies". The estimated potential standard deviation generated from these studies could be used if so desired.

Process stream standard deviations may be calculated from other studies. Typically, this would be done using ANOVA (Analysis of Variance). First, one would conduct an ANOVA and then calculate the variance components. If the factor is Fixed (all levels of interest have been included), note that the variance (typically designated as phi for a Fixed factor), must be multiplied by (n-1) over n. The square-root of this value would then be used for the Process Stream standard deviation. See your statistics facilitator or consultant for further help in this area.

Select **File|User-Set Std Dev** from the Main Menu. The following form will be displayed.

Check this box to set a *Measurement Error Standard Deviation*. Checking this box makes the Measurement Error Edit Box visible.

Check this box to set a *Process Potential Standard Deviation*. Checking this box makes the Potential Edit Box visible.

Check this box to set a *Process Stream Standard Deviation*. Checking this box makes the Process Stream Edit Box visible.

Enter a *Measurement Error Standard Deviation* here. This will only be visible if the Measurement Checkbox is checked.

Enter a *Potential Standard Deviation here*. This will only be visible if the Potential Checkbox is checked.

Enter a *Process Stream Standard Deviation* here. This will only be visible if the Process Stream Checkbox is checked.

Click this button to generate the new variable.

Click this button to exit without generating any new variables.

Brings up this Website.